st
Dispensing Ambient Water
1. Position bottle, glass, pitcher or cooking pot below tap.
2. Depress ambient water button downward to start ambient water flow.
3. Release button once desired fill level is achieved.
Dispensing Hot Water
Hot water is ready after 15 minutes for the 1 install. The water will be heated again. You
have to wait until the heating light is o.
1. Position bottle, glass, pitcher or cooking pot below tap.
2. Slide red switch left to the bottom and push hot water button downward to start hot
water flow.
3. Release button once desired fill level is achieved.
OPERATION INSTRUCTIONS
12
To Next Page
Loading...
