midiplus X6 - 4.3. Knob and button controller configuration; 4.4. Pulley and Octave adjustments

4.3. Configuration and function selection for knobs and
buttons:
Knob controller:(T1~T4)
(1)4 independent potentiometer knobs which are 270°and with back light.
(2)User defined CC functions.(Please refer to operations example 4 for details.)
(3)Turn left means decrease, turn right means increase.Default functions of knob:
T1: Volume
T2: Pan
T3: Expression controller
T4: Reverb
Button controller:(B1~B6)
(1) 6 independent on/off buttons which with bicolor LED can configure CC
function or MMC transport function.
( Please refer to Operations example 7 for details).
(2) The light is blue when sending CC information.
( but the light is red if it's “135” when sending CC information.)
(3) Default setting is transport function.
MMC transmission information: backward, forward, stop, play, loop and
recording.
4.4.Pulley and Octave adjustments:
XSeries--UserManual
05