midiplus X8 User Manual

4: Knob controller “T1” is for controlling the reverb effect CC91.
(1) Press MIDI/SELECT keypad, you'll be in sub-function edit mode.
(the indicator light is on, display shows “ ”.)
(2) Press the key corresponding to “CTRL CC”, display shows the current CC
number of controller.
(3) Rotate “T1” knob and edit, it should shows”7” by default.
(4) Press the key labeled number under “numeric keypad” on the right, input
“91”, and press the key corresponding to “ENTER” to confirm, display shows
“”, means setting succeed.
(5) Press MIDI/SELECT keypad again, the keyboard will be back to performing
mode, display shows the channel number.(the indicator light is off, the
optional function of knob “T1” CC91(Reverberation) is memorized.)
Note:It's the same operation if you want to edit other knobs.
5: Knob controller “T1” is for controlling channel 10.
(1) Press MIDI/SELECT button, you'll be in edit mode.
( the indicator light is on, display shows “ ”).
(2) Press the key corresponding to “CTRL CHL.”, the display shows the current
channel NO. of controller.
(3) Rotate knob “T1” and edit, it should shows “17” by default.
(4) Press the key labeled number under “NUMERIC KEYPAD” on the right, input
10”, and press the key corresponding to “ENTER” to confirm, display “
shows “ ”, means setting succeed.
XSeries--UserManual
08

midiplus X8 Specifications

General

Brand	midiplus
Model	X8
Category	Keyboard
Language	English