midiplus X8 User Manual

Capacitive touch sensors to control PITCH and MODULATION.
With function-editing button (MIDI/SELECT) and Octave switching button.
4 editable knob controllers(T1~T4) are for allocating CC function.
6 editable knob controllers with default and transport function for
allocating transport function/CC function.
1 MIDI OUT 1 SUSTAIN PEDAL interface and 1 USB interface. interface,
4.Operations
4.1. MIDI/SELECT button
MIDI/SELECT button:A button for switching the performing mode and
sub-functions editing mode.
Keyboard is in performing mode by default when switched on, Press the key
to send Note information, and Press MIDI/SELECT button, the keyboard will shift
to sub-functions mode ( indicators on , display shows “ ” ) , there is
corresponding label on each other key. Then select your function and press
“ENTER”, press MIDI/SELECT button again to finish editing, the keyboard will be
back in performing mode.
4.2.Sub-functions under edit mode:
4.2.1. Key channel selection MIDI CHANNELS(1~16):
For key channel selection.(The default channel 10 is percussion instrument
channel) (Please refer to Operation example 1 for details.)
XSeries--UserManual
03

midiplus X8 Specifications

General

Brand	midiplus
Model	X8
Category	Keyboard
Language	English