Miditech MidiStudio 2 - MIDI Implementation

MIDI IMPLEMENTATION:
Function Transmitted Remark Format
Default 0
Program
Change 0 - 127
Cn, pp
Default 0
Channel
Change 0 - 15
Default 36 - 84
Note
Change 0 - 120
Key down 0 - 127 9n, kk,
Velocity
Key up 0 - 127 8n, kk,
Default 99
Volume
Change 0 - 127
Bn, 07,
vv
Default 63
Reverb level
Change 0 - 127
Bn, 91,
vv
Default 63
Chorus level
Change 0 - 127
Bn, 93,
vv
Pitch bend wheel
ok En, vv,
Default 1 Modulation
2 Breath
4 Foot pedal
5 Portamento
8 Balance
10 Pan
11 Expression
64 Damper
65 Portamento
66 Sustenuto
67 Soft pedal
92 Vibrato
94 Celeste
Controller change
(Definition of the
Modulation
wheel)
Change
95 Pan depth
Bn, cc,
vv
Non-registered
Bn, XX,
Non-registered
Bn, XX,
Reset controllers
Bn, 123,
Default Mode 1
Omni Off Bn, 124,
Omni On Bn, 125,
Poly Off Bn, 126,
Set MIDI mode
Change
Poly On Bn, 127,
Notes:
1. ”n” refers to channel number, “pp” refers to program number, “kk” refers to key number,
“vv” refers to one byte data, “cc” refers to control number.
2. There are more controllers besides that listed in the table. Please refer MIDI specification for details
3. Mode 1: Omni On, Poly Mode 2: Omni On, Mono
Mode 3: Omni Off, Poly Mode 4: Omni Off, Mono