Midland BT1 User Manual

15
English
Decrease the volume Short or continues press on the Volume Down control
CELL PHONE (only driver’s unit)
Answer a call Short press of the Phone button / say a word
Reject a call Long press the Phone Button / remain silent until the rings stop
Terminate a call Short press the Phone Button
Voice Dial (in stand by mode) Short press the Phone button and state the name of the person to call.
Redial Last number (in stand by mode)
Long press of the Phone button
Conversation among passenger, driver
and the phone
During a phone call, short pressure of the Intercom button on the unit which recei
-
ved the call
Release the ‘extended’ conversation
above
Short pressure of the Intercom button
GPS Navigator (only for driver’s unit)
The control is done only by the GPS
INTERCOM
Start using the Intercom
Start talking/short press the Intercom button
Stop using the Intercom
Stop talking (after 20 sec. you will return to stand by mode)/Short press the Inter
-
com button
BLUETOOTH MP3 player of the cell phone (only driver’s unit)
Activate the MP3 player/Play and Pause
Press and hold down the “Intercom” button for 3 seconds.
Forword (next song)
While the music play, short press of the Phone button
Backword (previous song)
While the music play, short press of the AUX button
Deactivate the MP3 Player
Press and hold down the “Intercom” button for 3 seconds.
WIRED CONNECTION
Activate /Deactivate
Short press of the AUX button
SETUP/PAIRING
Enter SETUP mode
Press the Intercom button for 7 seconds while the unit is off
Pairing a Phone or a GPS Navigator
While in Setup mode, press the phone button until the LED light flash Red and Blue
alternately
Pairing the BT1 passenger’s device
While in Setup mode, press the Volume + on one unit (the light will flash Red and
Blue alternately), press the Volume - on the other unit (the light will flash Red and
Blue alternately). On a successful pairing, both light turn to Blue for one second.
Reset all paired devices
While in Setup mode, long press he Volume + and he Volume -. On a successful
reset, the Blue light will turn on for two second.
SPECIAL SETUP CONFIGURATION

Midland BT1 Specifications

General

Brand	Midland
Model	BT1
Category	Intercom System
Language	English