Changes in user manual
Pairing the BTX1 FM to Bluetooth devices
The BTX1 unit can be paired to other Bluetooth devices, like Phone, GPS Navi- gator or PMR446 Radio
with built-in or external Bluetooth (dongle). The pairing procedure must be done using the “Volume
+” or the “Volume -“ buttons.
› Pairing to the “Volume +” button: for Phone with music A2DP stereo, GPS Na-
vigator w ith A2DP audio or external m ono/Stereo A2DP dongle.
› All devices paired to “Volume +” button has higher priority and will interrupt a ll
the other communication (like Intercom, FM Radio and Music).
› Pairing to the “Volume -” button: for a second phone with mono audio (Hands
Free Protocol) for GPS navigators/ Radar detector and other devices which m ono audio.
Background feature
It is possible to keep always in background the audio of the device paired on Vol- button. In this way
the Intercom communication will not be interrupted, for example, by the GPS’s street indication or
the G8BT radio communication.
To activate the “Background”
-”
button, the voice “Background ON” will tell you that now is active.
To deactivate the “Background” feature just press again long the “Vol-” button, the voice
“Background disable” will tell you that now is not active anymore.
By default the “Background
feature is off.
Attention: we can’t garantee this features because is depending also on third part device.
Pairing with one or two phone
The cellular phone can be paired to the “Vol +” (if the support for stereo A2DP is requested) or to the
“Vol –“.
When a phone is paired to the “Vol +” or “Vol-“ the “Phone” mode is activated. A n in c o m in g c a ll h a s
always the higher priority, that means all other communications will be closed (Intercom, Music). If
another incoming call will arrive on the second phone, alert sound will notify it.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
