To Next PageTo Next Page
Need help?Do you have a question about the Midland BT2 and is the answer not in the manual?
General| Brand | Midland |
|---|---|
| Model | BT2 |
| Category | Intercom System |
| Language | English |
Key technical details, Bluetooth, and wire connection specs for the Midland BT2.
Outlines the 5 main sections of the operator's manual.
Details the BT2 unit's buttons and wired connections.
Instructions on how to charge the BT2 unit before first use.
Details the stereo speakers and microphone components.
Explains the plate and clamp methods for helmet mounting.
Describes how to attach and detach the BT2 from the mounting bracket.
Details single unit setup for rider-only use.
Explains pairing two units for rider-passenger communication.
Describes using multiple units with GMRS for group communication.
Explains priority for cell phones and GPS, and pairing via 'Phone' button.
Covers priority for other BT2 units and Intercom feature.
Steps to set the BT2 into pairing mode.
Instructions for pairing two Midland BT2 units together.
Guide to connect the BT2 to a mobile phone via Bluetooth.
Guide to connect the BT2 to a GPS Sat-Nav via Bluetooth.
Guide to connect the BT2 to a Bluetooth MP3 player.
Instructions for pairing with various other Bluetooth devices.
How to manually adjust the listening volume using buttons.
Enables communication between units, with manual or VOX activation.
Procedures for answering or rejecting incoming phone calls.
Steps for initiating and terminating phone calls.
How to manage multiple participants in a phone conversation.
How to play, pause, skip, and control MP3s from a cell phone.
How the BT2 handles audio directions from a GPS.
How to listen to music provided by a GPS device.
Managing cell phone features through the GPS Sat-Nav.
Allows passenger to listen to GPS audio/music simultaneously.
Controls for playing music from a Bluetooth MP3 player.
Connects devices without built-in Bluetooth using an adapter.
Connects BT2 to two-way radios for extended range communication.
How to connect and use wired audio sources like iPods.
Instructions for connecting and using a two-way radio.
Covers 3-way comms, VOX, disabling VOX, and music sharing.
Adjusting microphone sensitivity for optimal voice activation.
Using GMRS radios while maintaining intercom communication.
Explains LED and audio signals for general states like power and charging.
Describes LED signals during setup and pairing modes.
Details audio tones for intercom and feature activation/deactivation.
How to perform basic functions like turning on/off and adjusting volume.
How to answer, reject, make, and end calls, and use voice dial.
How to start and stop intercom communication.
How to control MP3 players and other Bluetooth devices.
How to activate/deactivate the wired audio input.
How to enter the setup mode for pairing.
Guides for pairing phones, GPS, Bluetooth devices, and other BT2 units.
Instructions to clear all previously paired Bluetooth devices.
Details the FCC rules and conditions the device must comply with.
Replacement audio kits and hi-fi speakers for the BT2.
Replacement mounting kits and dual connector DC adapters.
Stereo cables and GMRS connector cables for the BT2.
Instructions and form for ordering accessories by mail or online.
Legal agreement releasing Midland from liability for device use.
