Midland CT590 - Device Installation; Installing the Antenna; Installing the Battery Pack

CT590 user’s manual | 7
Installing the antenna
Screw the antenna as shown in the picture.
Installing the belt clip
Attach the belt clip with the supplied screws by a phillips
screw driver.
Installing the pattery pack
Slide the battery pack into the back of the radio, then lock it with the battery
release button; you will hear a click.
Releasing the battery pack
Turn o the radio before releasing the battery pack.
Hold the radio face down. Push the battery release button and slide the battery
pack towards you.
1 2 3 A
4 5 6
*
7 8 9 C
B
0 D
1 2 3 A
4 5 6
*
7 8 9 C
B
0 D
1 2 3 A
4 5 6
*
7 8 9 C
B
0 D