20 | CT590 user’s manual
Channel store - (MEM-CH) - MENU No. 27
When the radio is in frequency working mode or standby mode, input the de-
sired frequency or parameters directly.
To set a CTCSS tone or a DCS code in tx or rx on the stored channel, refer to
paragraphs MENU 10-13
Note: You cannot overwrite a stored channel, you have to delete it first. See fol-
lowing paragraph No.28.
Channel Delete (DEL-CH) - MENU No.28
In this menu you can delete a channel of the radio.
Standby backlight (WT-LED) - MENU No.29
In this MENU you can choose the color of the backlight when the radio is in
standby mode.
You can choose amongst :
OFF (backlight o)
GREEN
RED
ORANGE
RX backlight (RX-LED) - MENU No. 30
In this MENU you can choose the backlight color when the radio is receiving.
You can choose amongst :
OFF (backlight o)
GREEN
RED
ORANGE
TX backlight (TX-LED) - MENU No.31
You can choose the backlight color when the radio is transmitting.
Available colors:
OFF (backlight o)
GREEN
RED
ORANGE
To Next Page
Loading...