Midland DUALMIKE - DUALMIKE Device Overview and Setup; DUALMIKE Component Identification; Initial DUALMIKE Setup for CB Radio; Smartphone Connectivity and Hands-Free Operation

3
sec.
1 2 3
4
5
6
7
8
11
12
10
9
AL-DUAL
12V
3
sec.
3
sec.
3
sec.
VOL+VOL-
Device A
DualMike_xxx
Device B
3
sec.
13
DUALMIKE OVERVIEW
GETTING STARTED
Remove the standard microphone supplied with your transceiver
and plug-in DUALMIKE
AL-DUAL
Cod. C1403 (optional)
POWER ON
PTT CB
Press and talk towards the microphone
Yellow Light ring
Power On
Led steady blue 3 sec.
POWER OFF
Power O
Led steady red 3 sec.
USING DUAL MIKE WITH YOUR CB RADIO
1. Volume -
2. Led
3. Volume + (Power O - 3 sec.)
4. Emergency key (or customizable)
5. Channel up; Channel down (CBTalk)
6. Speaker
7. USB charging port/FW upgrade port
8. Light ring
9. PTT CB
10. PTT CBTalk (Power On - 3 sec.)
11. Pin connector:
4 Pin 48 (C1283)
4 Pin (C1283.01)
6 Pin (C1283.02)
12. USB charge only
13. DUAL MIKE is supplied with a metallic plate
for magnetic fi xing of the microphone. To use
it remove the plastic support fi xed with a screw.
USING DUAL MIKE WITH SMARTPHONES
PAIRING 1
Pairing
Red and blue leds alternately
blink
PRESS
TOGETHER
PAIRING 2
Connected
(Telephone connected)
Blue led blinking 3 sec.
HAND-FREE PHONE CALLS
AUDIO VOLUME
To answer/to end a call
White light ring
To reject an incoming call
White light ring
To make a voice dial Bop (max vol. Beep)