Midland G9 Manual

LINK SETTING FOR MIDLAND G9
Fig 1

Fig 2

If you have the radios as configuration Fig 2, make more attention when you cut the jumper, verify
and remove the part in excess of coil’s, otherwise whether the one remain inside the radios, can
bring about a short-circuit. If you want soldering the jumpers again, you make it in the base of pcb
and whether neccesary remove all coil’s.




Midland G9 Specifications

General

VOX	Yes
Water Resistance	IPX4
Display	LCD
Frequency Range	446.00625 - 446.09375 MHz
Channels	8
Output Power	500 mW ERP (PMR446); 10 mW (LPD433)
Weight	120 g (without batteries)