Midland H9 - 2.4 GHz Wireless Remote Control; Remote Control Operation Modes

19
2.4GHZ WIRELESS REMOTE CONTROL
VIDEO MODE
Video
Verify that H9 is in Video mode.
To start recording press the grey (Video) button. H9 will emit 1 beep and the blue led of the
camera will flash while recording.
To stop recording press the grey button again. The led will stop blinking.
PHOTO MODE
Foto
To capture a photo, verify the camera is in Photo mode.
To take a photo press the red (Photo) button. H9 will emit a shutter sound.
BURST
Burst
To capture a Burst series, verify the camera is in Burst Photo mode.
To take a burst series, press the red button. H9 will emit shutter sounds.
TIME LAPSE VIDEO
TL (Time Lapse) Video
To record a Time Lapse video, the camera must be set in TL Video mode.
To start recording press the grey button. H9 will emit 1 beep and the blue led of the camera
will blink while recording.
To stop recording press the grey button again; the led will stop flashing.
Video button
Photo button