HH50B Owner’s Manual
Page 2 midlandusa.com
Midland Radio Corporation
Hereby certifies that this unit has
been designed and manufactured,
in accordance with PART 15 of the
FCC rules. Operation is subject to
the condition that this device does
not cause harmful interference.
6 Inch Telescoping
Antenna
OFF/ON/ALERT
Switch
Volume Up/
Down Buttons
Weather Alert
Test/Rescan
Button
Operation Guide
Battery Installation: Push down and slide the battery case cover
off the unit. Insert 3 AAA batteries into the compartment,
noting polarity. Return battery case cover. (Note: You may
remove the belt clip with a screwdriver if it makes it easier
for you to insert the batteries).
Power On: Move the slide switch on the right side of the unit to
the “ON” position. The radio will auto scan and lock onto the
NWS broadcast in your area. If no broadcast is available,
you will hear static.
Note: If a weather broadcast cannot be heard on any of
the 7 channels, ensure the telescoping antenna is fully
extended and a new set of batteries is in the radio. Press
the “TEST” button to lock onto the next NWS broadcast in
your area. If this does not work, contact your local NWS
office and verify the closest station is on air.
To Next Page
Loading...
