Midland MH-PRO User Manual

MH-PRO
ISTRUZIONI
INSTRUCTIONS
Larghezza alloggio min/max
Min/max crab width: 63/100mm
Fissaggio manubrio/Handlebar fixing:
22-32mm
Per manubri con diametro da 22 a 25,4mm è possibile
utilizzare i distanziatori in dotazione.
For handlebars with diameter from 22 a 25,4mm use the
spacers supplied in the package.
Prodotto o importato da/Produced or imported by:
MIDLAND EUROPE srl
Via R.Sevardi 7 42124 Reggio Emilia - Italy.
Prima dell’uso leggere attentamente le istruzioni
Read the instructions carefully before installation and use.
Para más información visite/Pour plus d’informations,
visitez/Für weitere Informationen besuchen Sie:
www.midlandeurope.com

Midland MH-PRO Specifications

General

Brand	Midland
Model	MH-PRO
Category	Motorcycle Accessories
Language	English

Summary

MH-PRO Handlebar Mount Specifications and Installation

Handlebar Clamp Width

Specifies the minimum and maximum clamp width for the handlebar mount, ranging from 63mm to 100mm.

Handlebar Fixing Diameter

Details the handlebar fixing range from 22mm to 32mm, including use of supplied spacers for 22-25.4mm.

Attach Safety Rubber Band

Secure the elastic safety band to the holder as shown in the diagram for safe operation.

Secure Phone in Holder

Place the phone correctly into the holder and tighten the fixing knob securely.

Lock Phone with Rubber Band

Lock the phone using the rubber band as depicted in the illustration for a firm grip.

Attach Ball Joint to Holder

Loosen the ring nut, insert the ball into the holder, and retighten the nut to secure the ball joint.

MH-PRO USB Handlebar Mount Specifications and Installation

Handlebar Clamp Width

Specifies the minimum and maximum clamp width for the handlebar mount, ranging from 63mm to 100mm.

Handlebar Fixing Diameter

Details the handlebar fixing range from 22mm to 32mm, including use of supplied spacers for 22-25.4mm.

Attach Safety Rubber Band

Secure the elastic safety band to the holder as shown in the diagram for safe operation.

Secure Phone in Holder

Place the phone correctly into the holder and tighten the fixing knob securely.

Lock Phone with Rubber Band

Lock the phone using the rubber band as depicted in the illustration for a firm grip.

Attach Ball Joint to Holder

Loosen the ring nut, insert the ball into the holder, and retighten the nut to secure the ball joint.

Connect Power Cord

Connect the power cord, paying close attention to the correct polarity for safe operation.