EasyManua.ls Logo

Midtronics DCA-8000 Quick Start Guide

Midtronics DCA-8000
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DCA-8000
Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
www.midtronics.com
Page 1
Quick Reference Guide
167-000898EN-A
March 2019
Quick Start Guide
March 2019
167-000898EN-A
DCA-8000
Toyota/Lexus
IMPORTANT:
Always leave the DCA-8000 plugged-
in when not in use to allow the tool to automatically
check for and perform any available software updates.
Charging Cables
1. Insert the communication cable
until the connector locks into
place.
2. For strain relief, pre-twist each
quick connector counter clock-
wise, before inserting and rotat-
ing clockwise 180° onto each
Locking Post on the back of the
charger.
3. The connection process is complete when all three cables
are secured to the charger.
Locking Power Cord
Pull back on the red
tab on the side of the
connector to release/
remove the power
cord from the chargers
power socket.
Pull Back To
Release
Wireless Barcode Scanner Cable
1. Insert the RJ50 connector into the bottom of the scanner
base until it clicks into place.
2. With a at blade screwdriver, pry o the plastic cover over
the DB9 connection on the back of the charger.
3. Use the screws on the DB9 connector to secure the cable
from the dock to the charger.
NOTE: The barcode scanner base is magnetic and can
be placed anywhere on top of the DCA charger.
Initial Setup
1. Upon initial power-up, the Language Settings screen is dis-
played. Tap Next to continue.
System
Language
Select the Controller default language
displayed on the screen.
Test Result
Language
Select the Controller default language for
all displayed tests and test results.
Email
Language
Select the default standard language for
the analyzer to use for all tests and results
sent via email.
Print
Language
Select the default standard language for
the analyzer to use for all tests and results
printed using a networked printer.
2. A Consent to collect data screen is displayed. Read the
terms for collecting data, tap the Consent check box and
then tap Next to continue.
3. Select the correct logo for the dealer location.

Other manuals for Midtronics DCA-8000

Question and Answer IconNeed help?

Do you have a question about the Midtronics DCA-8000 and is the answer not in the manual?

Midtronics DCA-8000 Specifications

General IconGeneral
BrandMidtronics
ModelDCA-8000
CategoryDiagnostic Equipment
LanguageEnglish

Related product manuals