DSS-5000 Subaru
Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
www.midtronics.com
Page 1
Quick Start Guide
167-000839EN-A
October 2017
Quick Start Guide
October 2017
167-000839EN-A
DSS-5000 Subaru
Battery Analyzer
Before Using The DSS-5000 SUB
• Completely read this Quick Start Guide and become familiar
with the analyzer components.
• Fully charge the analyzer before using.
IMPORTANT: For additional support go to
www.subaruretailersolutions or call 1.866.213.4690,
8:00 am to 6:00 pm EST, Monday through Friday
Controller
Carrying Handle: For carry-
ing the Controller and Tester
Pod (when attached).
Controller Release Lever:
Press to release the Control-
ler from the Tester Pod.
Power Button: Hold for 2
seconds to
turn the Control-
ler on and o independent
of the Tester Pod. Flashes
when the Controller is being
charged.
Touch Screen: Primary user
interface.
Camera & Flashlight: For VIN scanning and identication.
Temperature Sensor: For measuring battery temperature.
Micro-USB Port: For updating and servicing the Controller
when a WiFi network is not available.
Power Supply Connection
Tester Pod
Controller Charging Contacts: For charging and communi-
cating
with the Controller when mounted to the Tester Pod.
Status Indicator LEDs:
- Power is on - Clamps reversed
- Tester Pod is communicating with the Controller
Clamp Storage Mounts: Use to keep the test clamps pro-
tected when the tester is not in use.
Tester Pod Internal Batteries
Charging Dock
Tester Pod Charging Contacts: For charging the Tester Pod
Power Supply Connection
To Next Page
Need help?
General
