Need help?Do you have a question about the Midwest MTC-6000 and is the answer not in the manual?
Explains buttons for data entry, mode selection, navigation, and programming.
Describes switches for synchronizing impulse and wired secondary clocks.
Details switches for manual ON/OFF control of output circuits.
Configures DST, display format, clock types, and baud rate.
Procedure to enter a code for program changes and time setting.
Step-by-step guide to set the master clock's current time and date.
Procedure to program beginning and ending dates for holidays.
Guide to programming ON/OFF times or durations for output circuits.
Instructions for reviewing programmed data and cancelling entries.
Details how to review programmed ON, OFF, and DURATION times for output circuits.
Procedure to review programmed holiday starting and ending dates.
Procedure to erase all programmed events except current time and date.
Instructions for testing front panel indicator lights.
Configure DST settings and 12/24 hour display format.
Setting the communication speed for serial ports.
Details synchronization methods for various types of synchronous wired clocks.
Lists codes and correction methods for different impulse clock types.
Information on fuse ratings and replacement of socket-mounted impulse relays.
Details the lithium energy cell's lifespan and symptoms of failure.
Lists power requirements, operating/storage temperatures, and weight.
Describes RS232 and RS485 ports for computer and digital clock communication.
To Next Page
General