Operation
46
Changing detergent
If you want to change the cleaning
agent, the dispensing system must first
be rinsed with water in order to avoid a
reaction due to the mixing of cleaning
agents.
Remove the siphon from the
container and place it in another
container filled with water.
Start “Vent the dispenser” twice (see
“Settings menu - External
dispensing”) to rinse the dispensing
system.
Then place the siphon in the new
container and start “Vent the
dispenser” again.
The dispensing system is now ready to
use.
Always follow the recommendations
of the cleaning agent manufacturer
whether using powder or liquid
cleaning agent.
To Next Page
Loading...
