Settings menu
91
Module settings
We recommend connecting your
dishwasher to your Wi-Fi network with
the help of the MielePro@mobile App or
via WPS.
If you would rather set up the
connection to your router yourself, or
you have a special network
configuration, you can enter the
relevant settings with the necessary
technical knowledge.
Start module activity
If you wish to reset all entered settings
and values for Miele@home, you can
restore the factory default settings on
your Wi-Fi module. Any settings which
do not affect Miele@home will remain
unchanged.
Select Default settings and confirm
with OK.
Please wait will appear in the display.
The message Module status: Process
successful will appear in the display after
a few minutes.
Confirm the message with OK.
The Wi-Fi module factory default
settings have been restored.
If the factory default settings were not
restored to your Wi-Fi module, repeat
the instructions above.
To Next Page
Loading...
