Need help?Do you have a question about the Miele professional PW 6065 Vario and is the answer not in the manual?
General| Brand | Miele professional |
|---|---|
| Model | PW 6065 Vario |
| Category | Washer |
| Language | English |
Proper methods for disposing of packaging materials and the old washing machine.
Advice on reducing consumption through load size, detergent use, and spin speed.
Specifies approved uses and general operating principles to avoid injury or damage.
Crucial safety guidelines for electrical connections, repairs, and unauthorized modifications.
Safety advice for using Miele accessories and precautions during cleaning.
Overview of the control panel, buttons, and essential steps before initial operation.
Navigation of the display, menu options, and specific operations for commercial wash-salons.
Guidance on preparing laundry, loading the drum, and understanding garment care symbols.
How to choose the right wash programme and general tips for better results.
A condensed guide covering laundry preparation, programme selection, and starting the cycle.
Instructions for adding detergent and the final steps of unloading the machine.
Detailed steps for choosing, modifying, and saving favourite wash programmes.
Explains available programme augmentations like Pre-wash, Rinse hold, Intensive, and Water plus.
How to set a delayed finish time for programmes up to 24 hours in advance.
Options to modify final spin speed and omit intermediate spins for reduced creasing.
Procedures for managing programmes while they are running, including adding/removing laundry.
Guidance on detergent quantities, water hardness, and using multiple wash components.
Information on fabric conditioners, starch, and external liquid dispensing systems.
How to clean the machine's casing, dispenser drawer, drum, and water inlet filters.
Solutions for common issues like the machine not starting or displaying error codes.
Addresses issues like shaking, noises, poor washing, and door opening problems.
Guidance on resuming programmes after power loss and emergency door opening procedures.
Information on how to get help, including PC interface and optional accessories.
Overview of machine parts and requirements for installation location and stability.
Steps for removing transit bars, levelling the machine, and securing it to prevent movement.
Detailed instructions for plumbing, water supply, and safe electrical hook-up.
Guidelines for water drainage, including dump valve and drain pump versions.
Key physical measurements, capacity, voltage, load, and cable lengths.
Details on water flow pressures, emission levels, safety standards, and test certificates.
To Next Page
