Problems with water Intake / Drain
Problem Possible fault Solution
Shortly after the
program start the
dishwasher stops
running.
The buzzer sounds.
The Intake / Drain
indicator flashes
when the door is
open.
The water supply
is shut off.
–
Open the water supply.
The dishwasher
stops.
The buzzer sounds.
The "Intake / Drain"
indicator flashes
when the door is
open.
Before fixing the fault:
– Turn the dishwasher off "o".
Fault in the water
intake.
– Open the water supply all the way.
– Clean the water intake filter, see
"User Maintenance Instructions".
– The water pressure at the water
connection is lower than 4.35 psi.
Consult a plumber.
Fault in the water
drain.
There may be
water in the wash
cabinet.
– Clean the triple filter.
– Clean the drain pump and the
non-return valve.
See "User Maintenance Instructions"
for more info on the above.
–
Remove any kinks in the drain
hose.
Frequently asked questions
32
To Next Page
Loading...
Need help?
General
