Message Possible cause and remedy
EMPTY THE DRIP
TRAY
appears in the
display, although it
is empty.
The drip tray is not sitting correctly.
^
Push the drip tray into the coffee machine until it clicks
into position.
or
The metal contact discs are dirty.
^
Clean the discs and then dry them thoroughly.
or
^
The drip tray sensing mechanism is not working.
^
Switch the coffee machine off and then back on again
using the master switch.
^ If the fault message appears in the display again,
contact Miele.
You can hear the
noise of the pump
and the following
appears in the
display:
FILL WATER
CONTAINER AND
PLACE IN THE
MACHINE
The coffee machine is attempting to draw in water although
the water tank is empty. Air is present in the pipework.
^ Fill the water container with fresh, cold tap water.
SYSTEM FILLING UP - START will appear in the display.
^
Press the OK button.
Problem solving guide
63
To Next Page
