Problem Possible cause and remedy
The descaling
programme was
started by mistake.
The descaling programme cannot be cancelled once you
have pressed the OK button.
The programme has to be completed through to the end.
This is a safety measure to ensure that the machine is fully
descaled, and is important for the long-term protection of
the machine and to ensure it functions correctly.
Descale the coffee machine (see "Descaling").
You can hear loud
noises during the
descaling
programme.
This is not a fault.
These noises occur when water is being flushed through
the machine under high pressure.
The heating-up time
is getting longer, the
amount of water
being dispensed is
incorrect and the
coffee machine is
not performing
properly.
The coffee machine needs descaling.
^ Descale the coffee machine (see "Descaling").
Water is being
sprayed above or is
running out of the
top of the
cappuccinatore.
The cappuccinatore and the steam tube are not
connected securely.
^
Make sure all connections are secure and push them on
tighter if necessary.
Milk is dripping out
of the
cappuccinatore
even though you
have finished
dispensing milk.
The level of milk in the milk container is higher than the
Cappuccinatore.
^
Turn the dial on the Cappuccinatore back to the
- position.
Problem solving guide
70
To Next Page
