EasyManua.ls Logo

Miele CM 5200 - Page 62

Miele CM 5200
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Message Possible cause and solution
FAULT - 74
^
Turn the machine off and then back on again.
If the fault message appears in the display again,
^
contact Miele Technical Service.
The following
appears in the
display, even
though the drip tray
is empty:
EMPTY THE DRIP
TRAY
The drip tray is not seated correctly
^
Push the drip tray into the coffee system into it clicks into
place.
or
The metal contacts are dirty.
^ Clean and dry the contacts.
or
^ The drip tray sensor is not working correctly.
^ Turn the coffee machine off and then n again with the
main switch.
^ If the fault still appears, contact Miele Technical Service.
Noises can be
heard from the
pump and the
display shows:
FILL WATER
CONTAINER AND
PLACE IN THE
MACHINE
The coffee system is trying to draw in water, even though
the water tank is empty. Air is present in the pipework.
^
Fill the water container with cold, fresh tap water.
SYSTEM FILLING UP - START will appear in the display.
^
Press the OK button.
Frequently asked questions
62

Table of Contents

Related product manuals