Cleaning and care
45
Unscrew the cap. Remove the seal
and the filter.
Clean all parts thoroughly. Rinse all
parts carefully under running water.
Then replace the filter (with the cross
facing upwards) and then the seal.
The opening of the seal should face
downwards. Finally screw the cap
back on tightly.
Push the water container back into
the machine.
Central spout
Clean the central spout’s stainless
steel cover by hand only, using
warm water and a little washing-up
liquid.
All other parts are dishwasher-safe.
Carefully pull the stainless steel cover
off.
Pull the dispensing unit down to
remove it.
To Next Page
Loading...
