Cleaning and care
63
Insert the rinse valve into the right
aperture in the drip tray cover and
confirm withOK.
The milk pipework will now be rinsed.
Cleaning the milk pipework
(maintenance program)
The Clean milk pipework maintenance
program lasts for approx.15minutes.
You need 1stick of cleaning agent for
milk pipework for the maintenance
program.
Tap.
Select Maintenance| Clean milk
pipework.
Confirm withOK.
The process will start.
Follow the instructions in the display.
Remove the water container. Fill it with
cleaning solution (see Operating
Instructions) and replace it. will appear in
the display.
Preparing the cleaning solution
For optimum cleaning results, we
recommend using the Miele Cleaning
Agent for milk pipework. The cleaning
agent has been specially developed for
use with Miele Coffee Machines and
prevents damage to the appliance from
unsuitable cleaning agents.
You can order the cleaning agent for
milk pipework from the Miele online
shop, from Miele Service, or from your
Miele dealer.
Place 1stick of milk pipework
cleaning agent in a container and add
300ml of lukewarm water. Stir the
solution with a spoon until the
cleaning agent powder has fully
dissolved.
Remove and empty the water
container.
Pour the prepared cleaning solution
into the water container. Replace the
water container.
Follow the further instructions given
in the display.
If prompted to do so in the display,
rinse the water container thoroughly
with clean water. Make sure that no
cleaning agent is left in the water
container. Fill the water container with
water.
The cleaning process is complete when
the drinks menu appears.
To Next Page
Loading...
Need help?
General
