Name: Miele Complete C2 Tango EcoLine
Brand: Miele
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Cleaning the roller on the AllTeQ

floorhead (dia. 40)

Clean the roller on the floorhead if re-

quired.

 Release the bearing (with bayonet fit-

ting) using a coin.

 Press the bearing out, and remove.

 Remove the roller.

 Remove any threads and hair, replace

the roller and refit the bearing, locking

it back into position.

Replacement parts are available from

your Miele dealer or from the Miele

Spare Parts Dept.

Cleaning and care

 Always disconnect the vacuum

cleaner from the electrical supply be-

fore cleaning it. Switch off at the wall

socket and unplug it.

Vacuum cleaner and accessories

The vacuum cleaner and all plastic ac-

cessories can be cleaned with a propri-

etary cleaner suitable for plastic.

 Do not use abrasive cleaning

agents, glass cleaning agents, all-

purpose cleaners or oil-based condi-

tioning agents!

Dust compartment

The dust compartment can, if neces-

sary, be cleaned using a dry duster,

brush or, if available, a second vacuum

cleaner to vacuum the dust out.

 Do not let the vacuum cleaner

get wet! If moisture gets into the va-

cuum cleaner, there is a risk of elec-

tric shock.

Questions and Answers:

Need help?

Do you have a question about the Miele Complete C2 Tango EcoLine and is the answer not in the manual?

Miele Complete C2 Tango EcoLine Specifications

General