^
Press the light coloured button under the handle of the
brew unit a and whilst doing so turn the handle in the
direction of the arrow b.
^
Press the catch in front of the brew unit c downwards and
pull the brew unit carefully out of the machine.
If this can only be done with difficulty, it is not correctly
positioned, (see "Problem solving guide").
^
Clean the brew unit thoroughly under hot running water
without washing-up liquid.
Leave the handle in the same position, otherwise the
brew unit will be out of alignment and you will not be able
to push it back into the coffee machine.
^
Wipe any remaining coffee off the two filters. One filter is
located in the funnel a and the other to the left of the
funnel b.
^
Dry the funnel area a to prevent ground coffee from
sticking to it.
^
Clean the inside of the machine and remove any coffee
residues. It is best to use a vacuum cleaner to remove dry
ground coffee.
^
Place the brew unit on the guide runners and keeping it
straight, push it into the machine.
Cleaning and care
60
To Next Page
Loading...
