Plumbed
This unit is designed for operation with
a permanent tap water connection but
can be converted from water line to
water tank use. To do that the plumbed
water line connection can be turned on
or off. When the unit is set to on, it uses
the water line. The water tank is
automatically filled.
When the unit is set to off, the water
tank is used and must be filled
manually with fresh tap water.
^ Select "Settings" then "More" three
times.
SETTINGS
+ back
PLUMBED ... ~
+ DISPLAY
RESET ~
+ TONE OPTIONS
^ Select "Plumbed".
^ Select "On" or "Off". The second line
shows the current setting.
^ Confirm with "OK".
Reset
To select the factory defaults select in
the submenu to "Reset all" (all settings
back to default: timer, rinse automatic,
steam system, lighting, System Lock,
water hardness, display, last selected
coffee type and all standard profile
settings), or the "User profiles".
If you select one of these options
^ Select "Yes" to reset to the default
settings or "No" to keep the selected
settings.
Settings
33
To Next Page
Loading...
