Miele CVA 5060 Operating And Installation Instructions

Adjusting the height of the
central spout
The height of the central spout can be
adjusted to suit the height of the cup so
that the drink will not cool down as
quickly as it would if the spout were
further away from the cup. The crema
will also be a better quality if the coffee
does not have so far to go!
^ Slowly pull the central spout
downwards.
Preparing espresso and coffee
from freshly ground beans
You can programme the size
of portion dispensed for
espresso and coffee
according to taste (see "Programming
the amount: setting the portion sizes").
Espresso, coffee, double espresso and
double coffee are all dispensed in the
same way:
^
Place a cup under the central spout.
The coffee is always dispensed
simultaneously from both spouts.
Espresso
q r HI J L n m C
^ Select the drink you want using the
arrow sensors and touch the OK
sensor once.
The machine will now grind the coffee
beans, pre-brew the ground coffee (if
the "Pre-brewing" option has been set
to "On") and the coffee will then be
dispensed from the coffee spouts.
Do not open the machine door
during the brewing process. This will
damage the machine.
To ensure that any coffee residues
from the factory testing process are
removed from the brewing system,
please throw away the first two
cups of coffee.
Making drinks
19

Miele CVA 5060 Specifications

General

Type	Coffee/Espresso
Product type	Espresso machine
Capacity in cups	15 cups
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Appliance placement	Built-in
Water tank capacity	2.3 L
Coffee beans capacity	500 g
Adjustable coffee strength	Yes
Maximum operating pressure	15 bar
Cord length	3 m
Product color	Black, Stainless steel
Housing material	-
AC input voltage	220–240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	480 mm
Width	595 mm
Height	455.5 mm
Installation compartment depth	500 mm
Installation compartment width	560 mm
Installation compartment height	450 mm