Miele CVA 5060 Installation And Maintenance Guide

–
When prompted, Place the lid on the container and hang
it in the machine.
Fit the lid from the stainless steel milk flask to the large
container and then turn it anti-clockwise until it engages
with the large container. Hang it in the machine where the
stainless steel milk flask normally sits.
^ Close the machine door and touch the OK sensor.
The milk pipework will now be cleaned. The main menu will
reappear in the display after the pipework has been cleaned.
The machine can then be switched off.
Stainless steel milk flask with handle
It is important to keep the neck of the flask and the seals
clean (whilst filling it and carrying it). Any soiling can lead to a
malfunction of the flask in the machine.
Do not fill the stainless steel milk flask to the neck. You need
to leave at least2-3cmgapbelow the neck.
^
Clean the stainless steel flask with hot water after use to
remove any residual milk.
^
Clean the handle under the tap and then clean it thoroughly
with a clean damp cloth to remove any milk residues.
Cleaning and care
16

Miele CVA 5060 Specifications

General

Type	Coffee/Espresso
Product type	Espresso machine
Capacity in cups	15 cups
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Appliance placement	Built-in
Water tank capacity	2.3 L
Coffee beans capacity	500 g
Adjustable coffee strength	Yes
Maximum operating pressure	15 bar
Cord length	3 m
Product color	Black, Stainless steel
Housing material	-
AC input voltage	220–240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	480 mm
Width	595 mm
Height	455.5 mm
Installation compartment depth	500 mm
Installation compartment width	560 mm
Installation compartment height	450 mm