. . . the message "Fault - 73" appears
in the display.
The brew unit cannot be positioned
correctly.
^
Take the brew unit out of the machine
and clean it thoroughly (see
"Cleaning and care - Brew unit").
^ Push the coffee ejector on the brew
unit into the correct position.
^ Set the brew unit to one side and
replace the waste container and the
water container in the machine.
^
Close the door.
The brew unit motor will now move
into the correct position.
^
When "Fit the brew unit" appears,
open the door and replace all the
parts in the machine.
^
Close the door.
If the fault message continues to
appear in the display, please call the
Miele Service department, quoting the
fault code.
. . . the message "Fault - 74" or "Fault
- 77" appears in the display.
^
Switch the machine off and then back
on again.
If the fault message appears in the
display again, contact the Miele Service
Department.
. . . the message "Check the brew
unit" appears in the display.
The brew unit may be dirty.
^
Follow the instructions in the display.
^ Clean the brew unit (see "Cleaning
and care - Brew unit").
^ Set a medium grinder setting and a
medium amount of coffee (see
"Setting the coffee grinder" and
"Settings: customising your machine -
Setting the amount of coffee"). Set the
amount of coffee to medium in any
User profiles as well.
. . . the ground coffee chute cover
cannot be pushed in properly.
^
Is the lid of the ground coffee chute
closed?
. . . You can hear "gurgling" or
"rushing water" noises.
^
The water container is being filled
automatically with water.
Problem solving guide
73
To Next Page
Loading...
