Miele CVA 5068 - Settings: Customising Your Machine; Resetting All Settings and User Profiles; Miele@home Connectivity

All settings
This option sets "All settings" back to
the factory default.
^
Select "Reset" under "All settings",
and touch the OK sensor.
All settings are then reset to the default.
If you select "Reset" by
mistake, switch the coffee
machine off: Resetting to the
factory defaults will not be carried out.
Factory default settings (the coffee
machine is delivered with the
following settings)
– Amount of coffee (medium)
– Temperatures for coffee and hot
water (medium settings for both)
– Pre-brewing (without)
– Automatic rinsing and Eco mode
(both set to "On")
– Plate warmer and Showroom prog.
(both set to "Off")
–
Time of day display (On for 60
seconds),
Clock format (24 h),
Timer - Switch on at (12:00),
Timer - Switch off after (1:00),
Timer - Switch off at (12:00), (Switch
on at and Switch off at are both
deactivated)
–
Coffee jug (3 cups)
–
Lighting: Brightness (medium)
–
Safety: System lock (Off)
–
Water hardness (Very hard 4)
–
Display: Display - Contrast (medium),
Brightness (maximum)
–
Volume: Volume of buzzer tones and
keypad tone (maximum setting for
both)
–
User profile: Revert (when switched
on).
User profiles
You can delete all user profiles except
for the standard one under "User
Profiles".
^
Select "Reset" under "User profiles",
and touch the OK sensor.
User profiles are then deleted.
If you select "Reset" by
mistake, switch the coffee
machine off: Resetting to the
factory defaults will not be carried out.
Miele|home
With Miele@home, the coffee machine
becomes communication-enabled and
can be operated via a pc or mobile
phone. For further information please
contact Miele.
Settings: Customising your machine
40