Displaying the number of cups of coffee
already dispensed (Total coffee)
Select feature “Total coffee” and press ENTER to dis-
play the number of cups of coffee (espresso, coffee,
long coffee) that have been dispensed to date.
Press ENTER again to bring you out of the sub-
menu.
Setting the standby timer
To ensure that the coffee machine does not use un-
necessary electricity but is always ready for oper-
ation, it can be set to an energy-saving mode via
programming option “Timer”. The lighting can also
be set to energy-saving mode.
The length of time that elapses before the appliance
switches to this mode can be programmed in, from
15 minutes to 12 hours 45 minutes. The time is
measured from the last time coffee/water was dis-
pensed.
If the time is set at 0:00, the machine will not switch
to standby.
Whenever the program selector is turned
to “0ff” or the appliance front is opened,
the machine will restart the timer.
Turn the program selector counterclockwise to
“Program mode”.
The appliance is now in programming mode and
will respond according to the symbols shown
under the buttons.
The following will appear in the display window:
Programming the appliance
22
To Next Page
Loading...
