The procedure is the same for the other two cof-
fee serving buttons.
The volumes of water programmed in will now be
dispensed every time.
Tea cup
To program in the volume of water for a
tea cup, feature “Prog. hot water” must be
turned on. (See the section on “Turning
the programmed hot water on or off”).
Turn the program selector clockwise to the “On”
position (with or without lighting).
The following two messages will appear in suc-
cession in the display window:
If the machine is cold and the rinse program has
been selected, the following message will be dis-
played once the water is hot:
Once the water is hot, it will automatically be ex-
pelled from the coffee dispensers.
Wait until the following message appears in the
display window:
Place a tea cup under the hot water spout.
Setting the serving sizes
29
To Next Page
Loading...
