Miele CVA 7440 Installation

11822990-02
Installation
*INSTALLATION*
Connecting the water supply
 Disconnect the coffee machine
from the power supply before
connecting it to the water supply.
Turn off the water supply at the
faucet before connecting the coffee
machine to the water supply.
Make sure that the faucet remains
accessible after the machine has
been installed.
To connect the coffee machine to the
water supply, a faucet with a 3/4"
connection is required.
 Check that a sealing ring is present.
Install one if necessary.
 Connect the stainless steel hose to
the faucet.
 Ensure that it is screwed into position
correctly.
 Turn on the water supply faucet
slowly and check for leaks at the
fresh water connection.
Correct the position of the seal and
screw thread if appropriate.
You can now continue installing the
coffee machine.

Miele CVA 7440 Specifications

General

Product type	-
Built-in grinder	Yes
Capacity in cups	1 cups
Milk adding type	Automatic
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Milk tank capacity	0.7 L
Appliance placement	Built-in
Water tank capacity	2.7 L
Coffee beans capacity	300 g
Reservoir for brewed coffee	Cup
Cord length	2 m
Control type	Touch
Product color	White
Used capsules container capacity	17 pc(s)
Current	10 A
AC input voltage	220–240 V

Weight and Dimensions

Depth	475 mm
Width	595 mm
Height	455 mm
Installation compartment depth	500 mm
Installation compartment width	560 mm
Installation compartment height	448 mm