Miele CVA 7440 Installation

11822990-02
Installation
*INSTALLATION*
Electrical connection
Before connecting the coffee machine,
make sure that the connection data on
the data plate (voltage and frequency)
matches that of the domestic electrical
supply.
This data must match to prevent the
coffee machine from being damaged. If
in any doubt, consult a qualified
electrician.
The necessary connection data is given
on the data plate inside your appliance.
The fuse rating must be at least 10A.
If possible, the socket should remain
easily accessible. If the socket is no
longer accessible after installation, an
additional means of disconnection must
be provided for all poles. Suitable
means of disconnection include
switches with an all-pole contact gap of
at least 3mm. These include circuit
breakers, fuses, and contactors
(EN60335).
Do not connect the coffee machine to a
stand-alone inverter. Stand-alone
inverters are used for autonomous
power supply, e.g., a solar power
system. Power surges could trigger the
safety shut-off function. This can
damage the electronics.
The coffee machine must not be used
with energy-saving plugs. These
reduce the amount of energy supplied
to the appliance, causing it to overheat.

Miele CVA 7440 Specifications

General

Product type	-
Built-in grinder	Yes
Capacity in cups	1 cups
Milk adding type	Automatic
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Milk tank capacity	0.7 L
Appliance placement	Built-in
Water tank capacity	2.7 L
Coffee beans capacity	300 g
Reservoir for brewed coffee	Cup
Cord length	2 m
Control type	Touch
Product color	White
Used capsules container capacity	17 pc(s)
Current	10 A
AC input voltage	220–240 V

Weight and Dimensions

Depth	475 mm
Width	595 mm
Height	455 mm
Installation compartment depth	500 mm
Installation compartment width	560 mm
Installation compartment height	448 mm