Miele CVA 7440 - Performance Issues and Unsatisfactory Results

Problem solving guide
75
Unusual performance of the coffee machine
Issue Cause and remedy
The display remains
dark after the coffee
machine has been
switched on using the
On/Off sensor.
The On/Off sensor was not touched for long
enough.
 Touch the depression in the middle of the On/Off
sensor for at least 3 seconds.
The plug is not inserted in the socket correctly.
 Insert the plug into the socket correctly and switch
on.
The mains fuse has tripped due to a problem with the
coffee machine, the electricity supply or another
appliance.
 Switch the coffee machine off at the wall socket
and unplug it.
 Contact a qualified electrician or your Miele dealer.
The lighting remains off
after the coffee
machine has been
switched on.
The lighting has been switched off.
 Switch the lighting on (see „Settings - Lighting“).
The lighting is faulty.
 Contact your Miele dealer.
The coffee machine
does not respond to
operation via the
display.
There is a fault.
 Touch and hold the On/Offbutton until the
display switches off and the machine restarts.
The coffee machine
turns off suddenly.
The factory set switch-off time (20minutes) or the
switch-off time you have programmed has been
reached.
 If required, you can select a new switch-off time
(see “Settings – Timer”).
The plug is not inserted in the socket correctly.
 Insert the plug into the socket.
The sensors do not
respond to touch.
The coffee machine can
no longer be operated.
There is an internal fault.
 Disconnect the coffee machine from the power
supply.