Frequently Asked Questions
82
Problem Possible cause and solution
Empty the drip tray ap‐
pears in the display,
even though the drip
tr
ay is empty.
The drip tray is not positioned correctly in the ma‐
chine.
P
ush the drip tray in as far as it will go.
The drip tray sensing mechanism is not working. The
conta
cts are soiled.
Clean the contacts and the space between them,
and d
ry them thoroughly (see "Cleaning and care -
Drip tray").
The machine door will
not close.
The containers are not pushed all the way in.
Check the containers.
The door hinges are not correctly aligned.
Adjust the door hinges (see "Installation - Adjust‐
ing the door hinges").
To Next Page
Loading...
