Always replace the filter immediately if
the lamp for the active charcoal filter
touch control comes on, or if it is no lon
-
ger effective in absorbing kitchen
odours.
It should, however, be replaced at least
every 6 months.
^
After fitting a new active charcoal fil
-
ter, press the active charcoal filter
touch control for approx. 3 seconds
to re-set the operating hours counter.
The indicator lamp will go out.
^ If an active charcoal filter is replaced
before the operating hours counter
has reached its maximum, the active
charcoal filter touch control should be
pressed for approx. 6 seconds to re-
set the counter to zero.
Cleaning and care
21
To Next Page
Loading...
