EasyManua.ls Logo

Miele DA 249-2 - Installation and Ventilation Safety

Miele DA 249-2
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Under no circumstances use a
steam cleaner to clean this appli
-
ance.
Pressurised steam could reach the
electrical components and cause a
short circuit.
Installation
The distance between the top of
the cooker/hob and the bottom of
the cooker hood must measure at least:
– 450 mm above an electric hob or
cooker,
– 650 above a gas hob or cooker,
– 650 mm above an open grill from
our range
For non-Miele cooking appliances
maintain the safety distance as recom
-
mended by the manufacturer in their In
-
stallation and Operating instructions.
If more than one appliance is fitted be
-
neath the cooker hood and they have
different minimum safety distances to
the cooker hood, select the higher dis-
tance.
Safety regulations prohibit the fit-
ting of a cooker hood over solid
fuel stoves.
All ducting, pipework and fittings
must be of non-flammable material.
These can be obtained from the Miele
Spare Parts department or from build
-
ers' merchants.
The appliance must not be con
-
nected to a chimney or vent flue
which is in use. Neither should it be
connected to ducting which ventilates
rooms with fireplaces.
If exhaust air is to be extracted into
a chimney or ventilation duct no
longer used for other purposes, seek
professional advice.
Warning and Safety instructions
6

Related product manuals