The cooker hood works with
. . . air extraction:
The cooker hood draws in the cooking
vapours. First, the air is drawn in via the
edge extraction panels. It is then
guided through and cleaned by the
grease filters before being directed
outside.
The cooker hood operates with a
non-return flap.
This flap is closed when the cooker
hood is switched off, so that no
exchange of room air and outside air
can take place.
When the cooker hood is switched on,
the non-return flap opens for the
cooking vapours to be blown directly
outside.
. . . air recirculation:
(DUU 2900 conversion kit for
recirculation required)
The air is drawn in through the edge
extraction panels and then cleaned by
the grease filters. It is then directed into
the recirculation unit where it is also
cleaned by the charcoal filters. The
cleaned air is then recirculated back
into the kitchen.
Before using the cooker hood in
recirculation mode, ensure that the
charcoal filters are in place. See
Cleaning and care.
...anexternal motor:
(EXT models only)
EXT models are designed to be
connected to an external motor located
outside the room.
The external motor is connected to the
cooker hood by means of a control
cable, and is operated by the controls
on the cooker hood.
Description of the functions
12
To Next Page
Loading...
