To Next PageTo Next Page
Need help?Do you have a question about the Miele DA 326 i and is the answer not in the manual?
General| Type | Wall-mounted |
|---|---|
| Width | 60 cm |
| Lighting | LED |
| Filter Type | Grease filter |
| Control Type | Electronic |
| Number of speed settings | 3 |
| Number of lights | 2 |
| Energy efficiency class | A |
| Color | Stainless steel |
| Operating mode | Ducted or recirculating |
Environmentally friendly disposal of packaging, safety for children.
Guidance on recycling old appliances and ensuring child safety.
Defines intended domestic use and manufacturer liability for improper use.
Covers electrical safety, earthing, and need for qualified personnel for installation/repairs.
Safety rules for children, open grills, flames, gas hobs, and steam cleaners.
Minimum distances above cookers and material requirements for ducting.
Instructions for connecting appliances with external fan motors (EX models).
Steps for safely disconnecting and discarding old appliances.
Illustration of the cooker hood's main components with numerical labels.
Details function and location of parts: exhaust stub, filters, control panel, lighting.
Explains operation: air extraction, air recirculation, and with external fans.
How to activate/deactivate the fan and select power levels using the deflector plate and switches.
Steps to switch the hob illumination on or off independently of the fan.
Emphasizes disconnecting power before any cleaning or maintenance work.
Guidance on cleaning exterior surfaces and recommended cleaning agents.
Introduces primary/secondary grease filters and their safety importance.
Step-by-step for removing and cleaning the primary filter by hand or dishwasher.
Instructions for removing and cleaning the secondary filter, with dishwasher caution.
How to correctly re-fit the secondary grease filter into the appliance.
Steps for re-fitting the primary grease filter, ensuring correct alignment.
Instructions for installing and replacing the active charcoal filter for odour absorption.
Steps for replacing light tubes/starters, including safety and cover securing.
How to contact Miele for faults, including required appliance details and service monitoring.
Detailed measurements and diagrams for DA 326 i (EXT) model installation.
Detailed measurements and diagrams for DA 327 i (EXT) model installation.
Detailed measurements and diagrams for DA 329 i (EXT) model installation.
Important considerations for wall unit fitting: deflector plate and ventilation access.
How building-in depth depends on lightshield position.
Required depths for DFB lightshield and furniture door thickness.
Minimum distance for lightshields matching kitchen furniture.
Purpose of side spacers in covering gaps between appliance and wall unit.
When a traverse is needed for wall unit stability without a back panel.
Illustration of various accessories used during installation.
Lists and describes fitting accessories: clips, collars, runners, screws.
Safety rules: no solid fuel stoves, minimum distances.
Sequential steps for installing the cooker hood.
Instructions for fitting non-return flap for extraction; not needed for recirculation.
How to fit the reducing collar for 125mm ducting for extraction/recirculation.
Instructions for fitting runners into wall units, with spacer blocks.
Positioning runners for custom lightshields based on measurements.
Guidance on fitting and aligning the furniture door before or after installation.
Steps for lifting and placing the cooker hood onto wall unit runners.
Adjusting appliance height with screws for a horizontal position.
Instructions for fitting the DFB lightshield, standard in Australia.
Attaching a custom lightshield to the deflector plate grip.
Adjusting appliance depth by loosening/tightening specific screws.
Instructions for fitting side spacers in 60cm units, including hinge cut-outs.
Measuring, trimming, and attaching the rear spacer strip.
Steps for fitting the light cover, including filter removal and screw securing.
Fitting the panel for the charcoal filter and securing ventilation ducting.
Required parts for recirculation and connecting the exhaust grille.
Special runner adaptation for 19mm thick carcase sides.
Fitting runners to spacer blocks in wider units, trimming cover caps.
Attaching cover caps to runners on both sides of the unit.
Using screws to conceal drill holes in the housing.
Safety, building rules, and material requirements for extraction ducting.
Recommendations for ducting diameter, bends, and hose types for efficiency.
Sloping horizontal ducting to prevent condensate and insulation needs.
All electrical work must be done by qualified persons per regulations.
Voltage and supply details for UK, AUS, etc.
Explains wire colors (earth, neutral, live) and plug connection.
Information for UK non-rewireable plugs, fuse replacement, and plug modification.
Power consumption for models and lighting wattage.
Extraction power (m³/h) for different fan levels and system diameters.
Fan performance data for recirculation mode with active charcoal filters.
Contact information and website for Miele UK and Ireland.
Contact details for Miele Australia and New Zealand, including distributors.
Contact information for Miele South Africa, including email.
