Changing the light bulb
Before changing the light bulbs,
disconnect the hood from the power
supply by either removing the fuse,
unplugging it, or manually "tripping"
the circuit breaker.
When in use halogen bulbs become
extremely hot, use caution. Do not
attempt to change the bulbs until
they have had sufficient time to cool.
Do not touch the bulb surface.
Fingerprints or body oils deposited
on the bulb will decrease its life.
Follow the bulb manufacturer’s
instructions.
^ Remove the grease filters.
^
Turn the knurled screw to the left. The
halogen lamp will swivel down.
^
Turn the bulb counterclockwise and
pull it out of its socket.
^
Replace the bulb with a new one in
the reverse order.
^ Return the grease filters.
Cleaning and Care
20
To Next Page
Loading...
