Changing a halogen lamp
^
Before any cleaning or maintenance
work, disconnect the cooker hood
from the mains supply.
^
Remove the grease filter.
^
Remove the charcoal filter if the
cooker hood is being used in
recirculation mode.
,
Exercise caution when changing
halogen lamps. They get very hot
during use and remain hot for some
time after being switched off. Let
them cool down before you change
them.
^
Push on the button above the lamp
housing to lower the lighting unit a
little.
^ The halogen lamp is now accessible
and should be unscrewed
anti-clockwise.
^ Replace it with a new halogen lamp
(specification: GU/GZ 10, 230 V,
50 W). Screw the lamp into the
socket and push it upwards.
Please follow the manufacturer's
instructions.
We recommend only using lamps of the
same specification and also made by
the same manufacturer as the ones
being replaced.
^
Replace the grease filter and, if being
used in recirculation mode, the
charcoal filter.
Cleaning and care
19
To Next Page
Loading...
