EasyManua.ls Logo

Miele DA 6798 W - Resetting the Filter Saturation Indicator for the Charcoal Filters; Disposing of Charcoal Filters

Miele DA 6798 W
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning and care
40
When to change the OdorFree
Charcoal Filter
Replace the charcoal filter when it no
longer absorbs kitchen odors
effectively.
It should be replaced at least every 6
months.
The filter saturation indicator reminds
you to regularly clean the charcoal filter
by illuminating the charcoal filter
symbol.
Resetting the filter saturation
indicator for the charcoal filters
After changing the charcoal filters, the
filter saturation indicator must be reset.
Touch the charcoal filter control for
approx. 3seconds with the blower
switched on until only the indicator
light for level 1 is flashing.
The charcoal filter symbol will go
out.
If you want to replace the charcoal filter
before the full operating time elapses:
Touch the charcoal filter control for
approx. 6seconds until only the
indicator light for level 1 is flashing.
Disposing of charcoal filters
The used charcoal filter can be
disposed of with the normal
household waste.
Charcoal filters are available to order via
the Miele Web Store (see end of this
booklet for contact details), or from
your Miele dealer.
The charcoal filters are listed under
“Technical data” at the back of this
booklet.

Table of Contents

Related product manuals