NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010405
Notes
• Center unit over cooking surface
• Distance "S" is determined by the cooking
surface. Minimum distance "S" is:
- 18" for electric surfaces
- 26" for gas surfaces
• Area behind mounting plates MUST be
reinforced using a minimum of 1/2"
plywood. Reinforcing material should be
affixed to structural wall members
Installation Dimensions
Decorator Wall Hoods
DA409
Ceiling Line
Center Line
S + 13 3/16"
Area must be reinforced
with a minimum of
1/2" plywood backing
Structural member
To Previous Page
Loading...
