Need help?Do you have a question about the Miele DA 270 and is the answer not in the manual?
General| Brand | Miele |
|---|---|
| Model | DA 270 |
| Category | Ventilation Hood |
| Language | English |
Details safety requirements for residential use, intended purpose, and proper grounding for electrical safety.
Covers safe operation, child supervision, fire prevention, and cleaning safety to avoid damage and hazards.
Provides warnings and instructions for reducing the risk of range top grease fires and safe responses.
Details safety measures for installation, including ductwork materials, clearance distances, and electrical connections.
Details the various parts and their functions, including canopy, lighting, and controls.
Explains the operation of the on/off button, fan power selection, and lighting controls.
Describes the grease filter button and its indicator for filter cleaning notifications.
Details how the hood extracts and vents air using grease filters and a non-return flap.
Covers turning the fan on/off, selecting power levels, and understanding fan performance.
Details automatic shut-off, delayed shut down, and control of overhead and indirect lighting.
Explains the grease filter timer, checking usage, and reprogramming its interval.
Guides on cleaning the hood casing, controls, and stainless steel surfaces safely.
Details how to remove, clean, and re-install grease filters, including timer reset.
Covers replacement of active charcoal filters and changing the light bulbs.
Lists phone numbers and email addresses for Miele's technical service departments in USA and Canada.
Covers proper disposal and recycling of packaging materials and old appliances.
Explains how to securely attach the ceiling mounting plate to structural framing or joists.
Details voltage, load, circuit rating, wiring, and the mandatory grounding requirement.
Presents diagrams and a table with precise measurements for the hood and its mounting.
Details minimum distances from cooktops and procedures for cutting the ceiling opening for exhaust.
Guides on positioning the mounting plate, marking bolt holes, and drilling pilot holes in the ceiling.
Instructions for attaching ducting, power cord, and mounting plate with screws and clips.
Details fastening the mounting plate, lifting the hood, and securing it with spring clips.
Covers bolting the flange, power cord connection, cover plate fitting, and filter preparation.
Warns about toxic fumes and details exhaust ducting requirements, materials, and connections.
Covers condensate traps for insulation and proper exhaust connection to inactive flues.
To Next Page
