Showroom programme
This programme is for demonstration
use only.
The
Demo mode and Demo mode in
continuous loop
programmes
demonstrate operation and functions.
–
Demo mode:
This programme is started by
pressing any sensor. It will run
through once and then has to be
started again.
–
Demo mode in continuous loop:
This programme will begin as soon
as you switch it on and then will play
in a continuous loop until you switch
it off.
–
Demo with sound:
This programme activates the pumps
to demonstrate the sound of the
dishwasher.
–
Demo programme:
Using for the first time is disabled in
the display.
–
Demo AutoOpen::
The door will open automatically.
To switch Demo mode on
^
Select the option you want and
confirm this with
OK.
^
Confirm the questions which follow
with
OK.
^
If necessary, touch any sensor to
start the Demo mode you have
selected.
^
To cancel it, touch any sensor and
confirm it with
OK.
To switch Demo mode off
^ Select
Off and confirm with OK.
^ Confirm
Switch demo mode off?
with OK
Factory default
If you have altered any settings from
the factory default, you can reset them
back to the factory default settings.
^ Confirm
Reset factory settings?
with OK.
^
Confirm
All settings reset with OK.
To close the Settings ! menu
Touch the Clear sensor U to come out
of the Settings
! menu and return to the
main menu.
Settings menu !
88
To Next Page
Loading...
